Results 1 to 4 of 4
Threaded View
-
03-08-2021, 04:30 PM #4
- Join Date
- Feb 2021
- Posts
- 6
I took Gambos advice and increased the fan airflow onto the main board. Actually I tweaked the regulator voltage a bit. Its a 5V fan but I increased the reg to 6V. I guess it may fail sooner with being marginally overdriven. But no repeat of the failures seen on the Ender so it may well have been overheating.
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help