Results 1 to 10 of 10
Thread: Advice on HiRes printer choices
Threaded View
-
03-05-2021, 02:11 AM #3
- Join Date
- Mar 2021
- Posts
- 4
Some answers
There should be minimal loading, the intention is to confirm "unloaded function", that is to say, do the bits work together correctly? This is intended to be a Proof of Concept before going to the much more expensive steel fabrication, and so the device function can be quickly and simply demonstrated.
I did my apprenticeship in both mm and inches, can machine to either thous or microns, but I got lazy I'll bear your advice in mind!
How do I learn the specifics of "Designing for 3d Print"? I use FreeCAD and am reasonably able with that, but it sounds like there is more to it...are there documents/videos that will help with my design style?
Thanks...I'll have a look.
Pretty handy...before I got into computer networking (I'm a freelance consultant) I was a ships engineer...you got to be handy when you're thousands of miles from anywhere and something breaks A kit sounds like additional fun!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion