Results 1 to 5 of 5
Threaded View
-
02-24-2021, 07:18 PM #4
- Join Date
- Jun 2014
- Posts
- 885
If you use other than PTFE, you are on your own, experimenting with materials not tried by others (that I've seen online) and can risk damaging the film. If you use specifically PTFE, and apply too much, who knows what will happen, but it won't damage the film. If you use too little, you're prints will stick as before.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion