Results 1 to 10 of 13
Thread: Adhesion problems CR10S Pro V2
Threaded View
-
02-15-2021, 11:25 AM #8
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
Yes more or less I haven't had a chance to look at the video but are you sure he said 0.02 mm not 2 thousandth of an inch called 2mil in usa which is the normal min level setting equivalent to 0.058mm the usual level setting is often 0.08mm (3mil ) the thickness of 80 gram printer paper.!
Last edited by Gambo; 02-15-2021 at 11:31 AM.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion