Results 1 to 8 of 8
Thread: Nozzle hitting build
Threaded View
-
02-14-2021, 02:46 PM #5
- Join Date
- Dec 2020
- Location
- N colorado
- Posts
- 19
I’ll try, thanks. After reset the board resets before it is able to print a file prepared using the Tronxy slicer.It still raises the bed causing the nozzle to hit the build. I am thinking I have an issue with my board. Looking at replacing my board. Which would be a good one to place in my machine.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion