Results 1 to 3 of 3
-
02-14-2021, 07:58 AM #1
- Join Date
- Sep 2020
- Posts
- 6
Ender 3 first layer blobs (MicroSwiss Direct Drive kit)
Hi,
I have a very recent issue where the extruder extrudes the plastic in the form of blobs, instead of a line with a constant width.
I am using an Ender 3 Pro with a MicroSwiss Direct Drive kit (which comes with their all-metal hotend), printing eSUN PLA+ on a magnetic PEI surface.
I have calibrated E-steps and flow. My bed is level.
Here are a few photos that demonstrate the issue:
https://imgur.com/a/UyL8E3T
I'd appreciate your advice.
Thank you.
-
02-14-2021, 08:01 AM #2
This could be a sign of moisture absorbed into the filament try a different roll of filament.
Last edited by Roberts_Clif; 02-14-2021 at 11:02 AM.
-
02-14-2021, 08:03 AM #3
- Join Date
- Sep 2020
- Posts
- 6
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help