Results 1 to 1 of 1
-
02-11-2021, 07:08 PM #1
- Join Date
- Feb 2021
- Location
- Onalaska, WA
- Posts
- 1
CR-10 S5 new machine non-responsive
New to 3d printing, assembled CR-10 S5, turned on control box, sent print head to home, checked bed heater for function, stopped pre-heat and turned off the machine. Came back to level bed and run a test print, box would not turn on with switch.I plugged a usb cable into the box and my computer, control box turned on, screen indicates is machine ready.The bed heater failed is a message I got on screen, had to reset. Still no response, I think I broke it, any suggestions on troubleshooting?
Never mind, I went back to the basics, power cord not properly secured... lolLast edited by Hman; 02-11-2021 at 08:54 PM.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help