Results 1 to 10 of 15
Thread: Calibration question
Threaded View
-
02-11-2021, 02:21 PM #5
Option B... put a ruler on the platform (next to the nozzle) and move it 100mm in each direction (X, Y, Z). Test it a few times... If you consistently get say 96mm in X direction and 101 in Y direction, you need to adjust your steps... https://www.instructables.com/Calibr...imal-filament/ is a great link for walking you through updating GCode M92.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)