Results 1 to 10 of 107
Threaded View
-
05-08-2014, 04:45 PM #10
- Join Date
- Apr 2014
- Posts
- 41
Minor update on that blocked extruder I had - I wanted to use the Flashforge to print a model rocket nosecone for a friend so decided to have a better go at unblocking it.
Heated the nozzle up to 220° and tried to reverse the filament out - no good.
Same for 230°, so I ran the nozzle up to 250° .... still no good. So I tried extruding and that seemed to work okay.
So I took a punt and set it up to print the nosecone and it all worked just fine. FWIW I upped the extruder temp to 230° and didn't have any blocking problems.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion