Results 11 to 12 of 12
-
02-07-2021, 05:56 AM #11
Stated in post load a Project file though you have to import a STL files and other formats.
-
12-05-2021, 02:31 AM #12
- Join Date
- Dec 2021
- Posts
- 1
So back to the 2 selections.....
The .3mf option is what you want to save as. I did it and the xyz slicing software reads it. I was then able to slice, or press the prepare button and now I'm printing on my jr 1.0 using creality software. I also downloaded the zip file and opened the Dav_VanciI_1.0_AIO ini file in the open profile in the file tab.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion