Results 1 to 1 of 1
-
02-04-2021, 10:26 AM #1
- Join Date
- Aug 2020
- Posts
- 11
Creality CR-10 pro with Simplify 3D
Hi, When I print a open ended box with 3mm thick walls there are 2 walls against each other with no connection to each other even though they touch. How to fix this? I have tried different settings in advanced buy all print the same.
Let me expand on this problem, the nozzle makes single lines for the box wall and they are not melted together! For 3mm wall it looks to make 6 passes, for 2mm wall it makes 4 and they are just against each other.
Thanks, TomLast edited by tombauer; 02-04-2021 at 02:17 PM.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion