Results 1 to 10 of 21
Thread: New - can't get started.
Threaded View
-
01-27-2021, 11:35 AM #3
- Join Date
- Jan 2021
- Posts
- 3
First Layer
After you level your bed plate, check that the center of your plate where most of your print is formed is low enough to really squish the first layer down on the plate. Also I have my plate temp. at 65 and have no adhesion issues at all.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help