If 3d Printing is hobby it unlikely you will find any good reason to use anything but PLA or possibly PET-G other than just trying it to see if you can make it work. If you are using 3D printing commercially the story is different you choose the filament for the job which sometimes makes life much more difficult. In any case find a filament make and material that works for you and stick to it ! Not all PLAs o ABSs etc are the same . For example of the 4 types of ABS we have tried only 2 can be relied upon to print reliably on our set up . Nylon is the same 5 tested 3 work for us.