Results 1 to 8 of 8
Thread: ‘Hover’ printing failure
Threaded View
-
01-15-2021, 11:00 AM #8
That's a lot of brim. You only need 2-3 layers instead of 15, if any at all for that print.
I use 215º-60º for PLA.
That's a lot of brim. You only need 2-3 layers instead of 15, if any at all for that print.
I use 215º-60º for PLA.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion