Results 1 to 6 of 6
Threaded View
-
01-08-2021, 10:30 AM #4
that is ABS
pla would say:180- 210c and 50c - I mean bed temp for pla should always be 65c. But manufacturers rarely get it right ;-)
But if the roll says that - it's abs. or possibly pet-g, but definitely not pla.
Either that or they just put the wrong settings on the label.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion