Results 1 to 6 of 6
Thread: List of accessories
Threaded View
-
05-07-2014, 02:13 PM #4
Nozzles can be swapped out easily. Since we don't restrict you to a certain manufacturer, some people will use the cheapest filament they can find. The very cheap filaments have sometimes clogged the smaller nozzles, but not the .5mm - so that is what we are using at present.
We should have them available by the end of the summer.
The digital gauges are not integrated to the software, and we don't plan to offer them until they are. However, you can obtain a digital dial gauge and attach it to our mounting block for the analog gauge if you need to. We still feel that the +/- .0005" (~13 microns) we achieve with the analog gauge is satisfactory.
We are making and posting videos regularly. I post them here when they are available. The tweaking includes live (while printing) adjusting of the Z positioning at present, and the next software release should include live rate of flow adjustments.
I don't see your email, so I will PM you.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion