Results 1 to 2 of 2
-
12-30-2020, 08:16 AM #1
- Join Date
- Dec 2020
- Posts
- 1
Best way to design a custom piece - complete newbie to 3D design
I have been printing using an Ender-5 for a few months, mostly from thingiverse and most recently using the SCAD customizer. Now I need to design a piece for my laser printing air extraction system but struggling to know how to start and which software would give me the best chance of success.The piece is an oval plug that fits inside a 160mm x 195mm pipe - I want it to go in about 25mm into the pipe. It needs to have an attached pipe in the middle of 100mm OD that extends 60mm out that will allow an extraction pipe to be attached.Sounds simple but what would be the best (easiest) way to start?Thanks!
-
11-29-2021, 01:43 PM #2
- Join Date
- Nov 2021
- Posts
- 1
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help