Results 1 to 2 of 2
-
12-28-2020, 10:11 AM #1
- Join Date
- Sep 2020
- Location
- Alicante/Spain
- Posts
- 3
Blocks for kids - for printing in vase mode. Quick and easy printing.
dobloxyblox.jpg
DoDoBloxy - for printing in vase mode. Quick and easy printing. They do not require additional processing.
- Big size (The largest block 150x50x50 mm)
- Wall thickness: 0,8 mm- Printed with additional partition walls to strengthen the blocks.
- Drain holes for easy cleaning in water.
- Printing time from 30 to 80 minutes depending on the type of block.
- Smooth prints that do not require additional processing.
- High performance. With 1 kg PLA, 100 blocks 50x50x50mm.
If the project is appreciated by the community, I will make the Core Set (3 Blocks) available on Thingiverse.
-
12-29-2020, 02:42 PM #2
- Join Date
- Sep 2020
- Location
- Alicante/Spain
- Posts
- 3
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion