Results 1 to 4 of 4
Thread: Infill density
-
12-10-2020, 01:09 PM #1
- Join Date
- Jul 2018
- Posts
- 34
Infill density
Hello I have been printing the infill at 5% density and it’s working really well for me. Has anyone printed lower?
-
12-10-2020, 03:45 PM #2
- Join Date
- May 2018
- Posts
- 566
depends on what you are fabricating. Most things I make need to be structurally strong so I don't do anything less than 25% and many things at 90 to 100% infill
-
12-10-2020, 07:09 PM #3
I have a Print with no infill.
Though If It did it would be worthless as a Yard Light Globe.
Globe 1.jpg
-
12-11-2020, 08:34 AM #4
- Join Date
- May 2018
- Posts
- 566
I have made flower pots with .75mm nozzle and .8mm walls , utilizing 2 process in S3D where the sides were created with vase mode. So no infill
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help