Results 1 to 8 of 8
Threaded View
-
12-01-2020, 05:20 PM #5
- Join Date
- Nov 2020
- Posts
- 9
The first thing to try for problems of the 1st layer not sticking is to clean the bed with isopropanol (propan-2-ol)
Iif that doesn't work, clean it with detergent (rinse very thoroughly but make sure you don't let the water get where it shouldn't and dry the machine thoroughly).
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion