Results 1 to 9 of 9
Thread: Anycubic i3 Mega S - Oh nuts!
Threaded View
-
11-27-2020, 11:35 AM #7
- Join Date
- Nov 2020
- Posts
- 9
I have a similar solution: the PETlock - printable in PET, ABS or Nylon:
https://www.myminifactory.com/object/3d-print-142792
Easier to assemble: no hammer needed, just an M3 screw to form the thread in the plastic (doing this before fitting to the printer is easier than doing it underneath the bed).
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion