Results 1 to 4 of 4
Thread: constant oozing extrdr R
-
04-29-2014, 09:39 PM #1
- Join Date
- Apr 2014
- Posts
- 3
constant oozing extrdr R
got constant oozing. see picture flashforge creator dual
whom to blame and from where to buy the parts
thanks
-
04-29-2014, 11:15 PM #2
- Join Date
- Oct 2013
- Location
- new jersey
- Posts
- 752
it will always ooze, ,some plastics worse than others but if its excessive then that can be from moisture in your filament. why do you need parts? is it broken?
-
05-03-2014, 06:27 AM #3
- Join Date
- Apr 2014
- Posts
- 3
i been guessing the filament feeder motor got current all the time when print, meaning, bad stepper driver controller
to check you suggestion will move the flmnt to L extruder
-
05-06-2014, 03:28 AM #4
- Join Date
- Apr 2014
- Posts
- 3
today 06 05 checked put the flmnt from L xtrdr which was behaving ok, to R xtrdr. result-- is oozing, problem not from flmnt
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help