Results 1 to 4 of 4
Threaded View
-
11-12-2020, 09:17 AM #3
- Join Date
- Nov 2020
- Posts
- 2
It works!!
Hi Curious Aardvark - you are a star - it works! Thanks. (I must say I assumed the fan would simply go backwards if the wires were wrong).
I was never going to change from Sailfish, merely to upgrade from 7.7 to 7.8 - but no need.
I hope it now improves the quality of my prints!!:-)
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion