Results 1 to 10 of 12
Thread: PET - not pet-g
Threaded View
-
11-04-2020, 02:13 PM #4
https://www.amazon.com/taulman3D-T-G...ustrial&sr=1-1
https://www.amazon.com/Taulman-1-75m...ustrial&sr=1-2
basically taulman t-glase is actually PET (they add an extra T for no obvious reason.
I have to say it's pretty weird why the industry went with pet-g when PET pretty much beats it in every practical application and is so much easier to use and store.
for me pet-g is really too soft for most applications. for places where pla is too hard, PET is an ideal substitute.
Still haven't found any glass point temps. - Ah okay about 80c - so same as petg.
And the longer ipad holder printed fine.
the angle of that underhang is amost exactly 45 degrees. According to my angle measureing plastic doohickey :-)
Not going to bother doing a longer one as that works just fine.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help