Twisted box - new version

[curious aardvark]

even did both parts at the same time for each box.

equal1 (Small).jpg

equal2 (Small).jpg

equal3 (Small).jpg

they were all printed on my sapphire pro corexy at 0.16 layer height and 150mms speed.
Both halves of a box were printed at the same time.
They've all been resized to 50mm height and the rest in proportion.

The first yellowy one was as it came and required a fair bit of sanding to get a smooth fit without jamming.
The resizing would naturally make the original tolearances that bit smaller and tighter - which i should have remembered for the first one :-)

The next yellow one and the browny/gold one (looks more gold than brown in real life) were printed with horizontal size compensation set to -0.1mm in simplify3d.
Those two work smooth and easily with no post processing.

Currently doing the new box in black with the same settings as the last two.

The yellowish one is polymaker polymax pla filament and the goldy brown one is reprappro pla - both have been sitting, unbagged, on a shelf in my workshop for at least 4 years :-)