Results 1 to 8 of 8
Thread: Ramps and CNC Milling
Threaded View
-
05-04-2014, 12:37 PM #4
- Join Date
- Mar 2014
- Posts
- 223
There's some RAMPS CNC machines around, I've been thinking about making one of these: http://www.thingiverse.com/thing:49484
Should be good for light work, routing fiberglass laminate, acrylic, plywood, etc.. I haven't done much research, but I think one of the drawbacks of using a RAMPs to control CNC is that it has lower precision, it moves the spindle in very tiny straight segments, not proper curves; although, IIRC, there has been some work to make the Marlin firmware able to work with curves.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion