Results 1 to 10 of 10
Threaded View
-
10-09-2020, 09:21 AM #3
Do you hear clicking from the extruder when this happens? It could be a clogged nozzle or some other source of friction in the filament path. Also, the layer height you mentioned, 0.3 mm, is too thick for a 0.4 mm nozzle. In general, layer height should be no more than half the nozzle width.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help