Results 1 to 5 of 5
Thread: Newbie needs help with firmware
-
09-16-2020, 10:18 AM #1
- Join Date
- Sep 2020
- Posts
- 3
Newbie needs help with firmware
I just got the Enders 3 v2 and being a newbie I thought it would need the firmware update so I update the firmware but it came with the BLTouch update and now I can’t print any thing. Is there a way to reset to the factory firmware or can I download it from somewhere?
-
09-16-2020, 01:26 PM #2
the original firmware should have come with it - on a usb stick or microsd card.
And - yep it's a good idea to actually use the printer before changing things :-)
-
09-16-2020, 02:37 PM #3
- Join Date
- Sep 2020
- Posts
- 3
I just checked the Micro SD card and did not see any firmware on it.
-
09-17-2020, 07:01 AM #4
it'll probab ly just be bin file.
you checked these ?
https://drive.google.com/drive/folde...JMT3wRDXvO7yDq
And somewhere on the card there should be a bin file.
-
09-17-2020, 10:40 AM #5
- Join Date
- Sep 2020
- Posts
- 3
I did not see any bin file on the sd card. i found the firmware on chep club web page loaded it and now it works. curious aardvark thank you for your help.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help