Results 1 to 3 of 3
Thread: Ender 3 Print
-
09-07-2020, 05:55 AM #1
- Join Date
- Jul 2020
- Posts
- 14
Ender 3 Print
Hello guys
In some spots it makes infill (lines) can i fix this
https://imgur.com/xFcmt2a
-
09-07-2020, 06:57 AM #2
it's because the model is not an even thickness all the way round.
so at those points the gap is too narrow for a full extrusion line and the slicer has to fill in that way.
It makes absolutely no difference to the final model - and often that kind of gap fill is stronger than a single extrusion line.
But basically it's down to different wall thicknesses in the actual model.
-
09-07-2020, 10:02 AM #3
- Join Date
- Jul 2020
- Posts
- 14
Thanks allot ! for fast reply !!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion