Results 1 to 10 of 11
Thread: Printed box leaks
Threaded View
-
09-06-2020, 08:55 AM #10
- Join Date
- May 2018
- Posts
- 566
That must be one of those bug features of 4.1 in 4.01 solid layer does not need to be checked to achieve 100% infill. However, this would explain the OPs issues.. I am sooo glad I did not update S3D.. If Prusa would just get the supports to work as well or better than S3D I would be using that full time.
I SEE the difference, I have never had print every infill angle on every layer checked. uncheck that and infill percentage will work as one would expect!Last edited by airscapes; 09-06-2020 at 03:06 PM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help