Results 1 to 10 of 132
Thread: My 3 Color Mixing Printer
Hybrid View
-
08-03-2020, 09:48 PM #1
I am getting close to completion on this machine now. When i am done i will upload all the files i made for this to thingiverse and share with all as i did with the other 2. But that is later. Right now 'Old Blue' has finished making the voltage display and light bar power switch mount..
It took 7 hrs to print that part and it printed with a lot of support material. I sliced it with S3D and printed it with PETG at 250c with no cooling fan. After removing all the support material I mounted the lm2596 step down converter with voltage display and the led light bar power switch and installed the assembly on Printalicious. Once i got everything wired up i plugged in the printer and powered it on for the first time since this rework started and i couldn't be happier with what i got so far..
Now I gotta make a mount for the touchscreen with the same dimensions to mount to the other side of the robot and all 3 printers will have a near identical UI setup..
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion