Results 1 to 8 of 8
Threaded View
-
08-03-2020, 09:34 AM #6
- Join Date
- Aug 2020
- Posts
- 9
Years ago i mocked up a prototype of a 500x500 printer. Had to take it apart as it was too big for my flat.
I used 6 nema 17s. 2 for each axis. Pretty much just replacing the idlers with a aditional stepper. Or if the bed moves side to side. Use twin belts.
Obviously do what works for you. And hope this helped.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion