Results 1 to 10 of 50
Threaded View
-
07-28-2020, 09:39 AM #7
- Join Date
- Oct 2016
- Posts
- 184
Also the amount of waste material with 6-colors vs. the actual result is quite ridiculous. Here's all the purge material accumulated in 4 days of failed benchies. I'm using a purge bucket (or chute since it doesn't have a bottom) so all the purge just falls to the ground. The inital idea was to have a buckett, but the amount of purge material with 6 colors will fill it up quite fast.
IMG_20200727_130154.jpgIMG_20200727_130201.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion