Results 1 to 3 of 3
-
07-25-2020, 04:06 PM #1
- Join Date
- Jun 2020
- Location
- El Dorado Spgs, Mo
- Posts
- 25
temperature changes on Ender 3 pro extruder
Relative noob with Ender 3 Pro--stock--That changes Extruder Temp during a print. Am running Cheps profile with changes to hot end 215 and bed 63. Starting at 215 it will go to 220, 225, and sometimes to 200, 190 or 185, randomly. The time varies from 2 or 3 minutes on up, and always to a number divisible by 5. Way beyond my pay grade! Any help is very appreciated. Thanks!
Enable GingerCannot connect to Ginger Check your internet connection
or
reload the browserDisable in this text fieldEditEdit in GingerEdit in Ginger×
Sorry, I don't seem to be able remove that Ginger crap above!Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldEditEdit in GingerEdit in Ginger×
-
07-29-2020, 04:04 AM #2
-
07-29-2020, 08:43 AM #3
- Join Date
- Jun 2020
- Location
- El Dorado Spgs, Mo
- Posts
- 25
Thank you. I am in the process of learning more about autotuning, as has been suggested by others. Appreciate your time!Enable GingerCannot connect to Ginger Check your internet connection
or reload the browserDisable in this text fieldEditEdit in GingerEdit in Ginger×
My 3D Norn Emissary print
09-13-2024, 02:28 AM in 3D Printing Gallery