Results 1 to 5 of 5
Thread: Printed object is not sticking.
Threaded View
-
07-23-2020, 03:55 PM #2
- Join Date
- Jun 2020
- Location
- South Carolina
- Posts
- 55
What type of filament are you using? The heated bed usually works fine for me with PLA, but I have that problem with Abs.
I have to up the bed temperature to 60 or 70 and a little hairspray on the bed helps a lot.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion