Results 1 to 6 of 6
Threaded View
-
07-20-2020, 02:12 PM #4
Knew it was a long shot.
Post your 3D Printer specs, along with which firmware you are using.
You may need to calibrate your steps per mm on your Z-Axis
Knew it was a long shot.
Post your 3D Printer specs, along with which firmware you are using.
You may need to calibrate your steps per mm on your Z-Axis
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help