Results 1 to 8 of 8
Threaded View
-
07-17-2020, 08:08 PM #5
- Join Date
- Jul 2020
- Posts
- 13
Yes, go with the 23's, but remember that there are at least two versions of the 23's so don't get the high torque version.
Yes, go with the 23's, but remember that there are at least two versions of the 23's so don't get the high torque version.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion