Results 1 to 5 of 5
Thread: Ender 3 Z axis not moving
Threaded View
-
07-17-2020, 03:35 PM #5
- Join Date
- Jul 2020
- Posts
- 4
screw like this is almost impossible to move it linearly to make it rotate, it's always the others way, rotation to make it move Make sure that the servo of the z axis is parallel to the frame; loosen the screws of the servo a little bit when at the bottom make it move and then tighten them.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help