Results 1 to 6 of 6
Thread: Nylon 230 filament outer layer
Threaded View
-
07-15-2020, 04:23 AM #5
- Join Date
- Jun 2020
- Posts
- 3
I have found that keeping the nylon filament dry and not having long contact areas with the building plate as well as using Aprintapro Printafix on the standard build plate works for me. When I say long contact areas I mean over a couple of centermeters as it seems to me that the nylon shrinks slightly in the middle causing the ends to lift off the build plate. I also use a skirt (1 layer with 6 outer layers) and raft.
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion