Results 1 to 3 of 3
Thread: Mini 3D printed cities
-
07-05-2020, 01:41 PM #1
- Join Date
- Jul 2020
- Posts
- 2
Mini 3D printed cities
Hello, very new to 3D printing here. Looking for my first 3D printer. Did a lot of research and I think I want to get the Prusa MK3S or the Dremel 3D45. What I need it for is to print miniature cities, like Manhattan. Will these printers be the best bet for this required detail or do I need to go with something else?
Much appreciated.
-
07-07-2020, 07:46 AM #2
depends how small and how much detail.
You'd probably be better off with a resin printer. Just bear in kind the resin is quite toxic and you do need to take safety precautions when using the machines.
And there is a fair amount of post processing involved. suppoort removal (if used) washing in isopropyl alcohol and then hardening under a uv light.
BUT the results are most likely exactly what you are looking for.
-
07-07-2020, 07:42 PM #3
- Join Date
- Jul 2020
- Posts
- 2
Thanks for your feedback. I don't think I want to go with resin due to the extra cost for material.
I had this in mind. https://microscape.co/
I think they're using filament. They won't reply to me though.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help