Results 1 to 2 of 2
-
04-29-2014, 10:10 AM #1
Mezmorize yourself and print with Project Silkworm
Recently I had my extruder at my maximum height of 200mm and I extruded about 2 feet of filament to diagnose something. I watched as the filament touched the bed below and then began to make these perfect organic coils over and over. It was memorizing and fascinating. I thought that there had to be a use for that but then I plowed on and never thought about it again. Apparently someone WAS thinking about it. This is cool:
Free Your 3D Printer from Slicers and Print with Project SilkwormBambu P1S/AMS
NVision4D http://nvision4d.com
-
04-29-2014, 02:54 PM #2
- Join Date
- Apr 2014
- Posts
- 27
Pretty nifty indeed. Here is the video tutorial
I believe that Neri Oxman was working on a 3D printing Silkworm model. I wonder if this was taken from her ideas:
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help