Results 1 to 3 of 3
Thread: Creator 3 supports problem
Threaded View
-
06-22-2020, 05:41 AM #3
- Join Date
- May 2020
- Posts
- 626
Done the calibration twice just to check, X-axis and Y-axis line up spot on. There is a two coloured square file included and that prints okay.
When i move the extruder gantry gently without power backwards and forwards in the Y-axis it feels a bit sticky and jerky, more so pushing it back than pulling it forewards.
Sent files to Technology outlet and they say the files print okay at their end, so I assume it's a problem with my machine.
Any way it's going back to Technology Outlet today.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion