Results 1 to 2 of 2
Thread: Skr mini e3 1.2
-
06-10-2020, 11:46 PM #1
- Join Date
- May 2020
- Posts
- 5
Skr mini e3 1.2
Hello!
Can anyone help/guide me to installing a bootloader to my skr mini e3 1.2? Also after building through vscode&PIO do I just copy paste the bin file to sd card?
-
06-17-2020, 10:21 AM #2
skr mini e3 already has bootloader. Just put your new bin file on the root of the card, plug it in and turn on your machine. there will be a delay before the screen displays anything, but when it does, your new firmware is loaded. check the card to confirm, but if all went well, firmware.bin is replaced with firmware.cur
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help