Results 1 to 6 of 6
-
06-12-2020, 10:00 AM #1
- Join Date
- Mar 2020
- Posts
- 6
Printing issue with flat surfaces
Hi all. When i am printing something flat usually at the top i have some line gaps. However when i print something small i have no issues. Any idea why that happens?I add a link to one of my prints to understand my issue. I use ender 3 and Cura 4.5.6.
Thanks
https://imgur.com/a/VHDWdUN
-
06-12-2020, 02:25 PM #2
- Join Date
- Jun 2020
- Location
- USA
- Posts
- 8
This could be due to a verity of factors. Is this a stock Ender 3?
Can let us know your Cura settings, screenshots would be best. Also what filament are you using?
-
06-12-2020, 05:56 PM #3
- Join Date
- Mar 2020
- Posts
- 6
I have the following upgs. E3 SKR mini 1.2, BLTouch V1.3, the creality glass bed. Specific print is with eSunPLA+. My Cura settings are the ones recently uploaded from Chep for 4.5.6. I used the one which Chep named it best quality.
However the specific issue i had it also before the upgrades for similar surfaces and with previous Cura versions.
Thanks
-
06-12-2020, 09:35 PM #4
- Join Date
- Jun 2020
- Location
- USA
- Posts
- 8
Do you still have the stock extruded bracket? Does the printer make any clicking noises on those long passes?
-
06-13-2020, 12:53 AM #5
- Join Date
- Mar 2020
- Posts
- 6
Thanks gigobait. Sorry forgot to mention that i have changed the plastic with the metal extruder. I do not hear any clicking noise.
BR
-
06-13-2020, 12:57 AM #6
- Join Date
- Mar 2020
- Posts
- 6
Also my bad. The profile i used from chep was not 4.5.6. Was 4.6!
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion