Results 1 to 7 of 7
Threaded View
-
06-04-2020, 06:27 AM #4
- Join Date
- May 2020
- Posts
- 13
it's an ender 3 pro, with a microswiss direct drive extruder and all metal hot end.
I have also installed motor dampers on X and Y axis stepper motors.
I have ordered a new mainboard from bigtreetech, and a BLTouch sensor, hopefully that at least solves some of the issues I'm struggling with
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help