Results 1 to 3 of 3
Thread: Weird Layer separation Problem
-
05-28-2020, 01:18 PM #1
- Join Date
- May 2020
- Location
- Canada
- Posts
- 2
Weird Layer separation Problem
Hello, lately ive been having this weird problem that has me pretty confused on what to do. Whenever i print a hollow square shape with the right dimension it leave a gap right in the middle of the wall almost all the way trough. Ive attached 2 picture to show what i mean, can anyone enlighten me on what the heck is happening there? Thanks in advance. I am using a cr10s pro if that can be of any help.
-
05-28-2020, 01:25 PM #2
it's down to the infill settings in the slicer.
You need 'gap fill' switched on.
No idea if cura has gap fill - but it ought to :-)
-
05-28-2020, 01:53 PM #3
- Join Date
- May 2020
- Location
- Canada
- Posts
- 2
Im using the creality slicer and after reading your reply ive found a parameter called infill overlap % im guessing thats gonna fix my problem, thanks for the reply.
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help