Results 1 to 2 of 2
Thread: Model Topographic Maps
-
05-14-2020, 01:43 AM #1
- Join Date
- May 2020
- Posts
- 2
Model Topographic Maps
Hello,
I am interested in modelling an area of ~20,000 Sq Km which has a max/min elevation of around sea level to ~1000m.
I'm hoping to print this to size of around A4 sheet of paper.
I have no prior knowledge of 3D Printing but have done limited amount of modelling before using Solidworks/AutoCad. I am hoping to pick up some new skills during lockdown. Once my model is completed I will be sending this to a printing company.
I was following this How To Blog but can see some issues before I begin.
1. Generate 3D Model Terrain using Terrain2STL or TouchTerrain
2. Then complete using TinkerCad
Alternatively on Udemy I found a course called '3D Topographical Earth in Blender 2.8'
https://www.udemy.com/course/blender-earth/
Is Blender another good alternative? Or should i be looking at using something like Autocad for this project?
Thanks
-
01-12-2021, 05:57 AM #2
- Join Date
- Oct 2020
- Posts
- 2
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion