Results 1 to 5 of 5
Threaded View
-
05-06-2020, 03:16 PM #5
use the sticker - if they sent yopu one then they don't expect you to just print on the bed.
the other way is to adjust your z-axis gap in the slicer software. start with 0.1mm and go up in 0.05 increments untill you get to the sweetspot where things stick while printing and release when cold :-)
Huh weird, it's replicator clone. but with one extruder and an unheated bed. That is an odd duck :-)
And the bed is Glass - not plastic :-)
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help