Results 1 to 3 of 3
Thread: 3D Printing Transmission Towers
-
05-04-2020, 03:32 AM #1
- Join Date
- May 2020
- Posts
- 1
3D Printing Transmission Towers
Having recently bought a 3D printer I decided to see if I could produce a scale model of a transmission tower as I work in the UK industry. Below is my current progress on a 1:10 scale L4m D tower, printing out bars indivdually and then using M2 bolts to connect. Ideally I would have liked to use a smaller scale but found the bolt sizes would be too small. Eventually the tower will be over 2m in height so a long way to go!
image0 (2).jpg
-
05-04-2020, 08:17 AM #2
- Join Date
- May 2018
- Posts
- 566
Good luck with it, looks great so far!
-
05-14-2020, 04:10 PM #3
That's cool. Please post update pics as it progresses.
Printer will print perfect...
Today, 09:40 AM in Tips, Tricks and Tech Help