Results 1 to 2 of 2
Thread: MP Maker Select Plus Help Please
-
04-28-2020, 06:06 PM #1
- Join Date
- Apr 2020
- Posts
- 1
MP Maker Select Plus Help Please
Hi. I am having issues with filament not feeding correctly. The extruder gear is covered in filament shavings and there is a grinding sound. I basically replaced everything on the hotend. I am at a loss and need some advise. Any help would be greatly appreciated.Photos attached.TY Scott Z0
-
04-29-2020, 10:02 AM #2
judging by the blob on the end of the filament you need a ptfe liner in your hotend.
Basically there's a cavity that will get filled with molten plastic and that blocks the nozzle, leading to back pressure and that's why the extruder is grinding.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion